products

Self-Aligning Ball Bearing with Extended Inner Ring

Product Description

Self-aligning ball bearings have two rows of balls and a common sphered raceway in the outer ring. The bearings are insensitive to angular misalignment of the shaft relative to the housing. Self-aligning ball bearings generate less friction than any other type of rolling bearing, which enables them to run cooler even at high speeds.

JEV self-aligning ball bearings are available in several designs, including:
1.basic design bearings
2.bearings with an extended inner ring
3.sealed bearings

Note:Swipe left or right to view the complete table!

Bearing Designation Boundary Dimensions Basic Load Rating Limiting Speed Shoulder Dimensions Cons-tant Coefficient of axial load Mass
(mm) (kN) (rpm) (mm)
MBY d D B r Cr Cor Grease Oil da Da ra e Y1 Y2 Y0
(min.) (min.) (max.) (max.)
11204E 20 47 14 1 40 12.7 3.4 9000 41 42 1 0.3 2.1 3.3 2.2 0.18
11205E 25 52 15 1 44 14.3 4 8000 45.6 47 1 0.28 2.2 3.5 2.5 0.22
11206E 30 62 16 1 48 15.6 4.65 6700 53 57 1 0.25 2.5 3.9 2.5 0.35
11207E 35 72 17 1.1 52 19 6 5600 62.3 65.5 1 0.23 2.7 4.2 2.8 0.54
11208E 40 80 18 1.1 56 19.9 6.95 5000 68.8 73.5 1 0.22 2.9 4.5 2.8 0.72
11209E 45 85 19 1.1 58 22.9 7.8 4500 73.7 78.5 1 0.21 3 4.6 3.2 0.77
11210E 50 90 20 1.1 58 26.5 9.15 4300 79.5 83.5 1 0.21 3 4.6 3.2 0.85
11212E 60 110 22 1.5 62 31.2 12.2 3400 97.6 102 1.5 0.19 3.3 5.1 3.6 1.5
11305E 25 62 17 1.1 48 19 5.4 6700 52.5 55.5 1 0.28 2.2 3.5 2.5 0.41
11306E 30 72 19 1.1 52 22.5 6.8 5600 60.9 65.5 1 0.25 2.5 3.9 2.5 0.61
11307E 35 80 21 1.5 56 26.5 8.5 5000 69.5 72 1.5 0.25 2.5 3.9 2.5 0.81
11308E 40 90 23 1.5 58 33.8 11.2 4500 81.5 82 1.5 0.23 2.7 4.2 2.8 1.1
11310E 50 110 27 2 62 43.6 14 3600 95 101 2 0.24 2.6 4.1 2.8 1.7